Guide / Camera
Film formats, stocks and exposure
Real film gates and sensors, film stocks with their grain and halation, and camera exposure.
Three camera settings that work together: the film gate or sensor the camera shoots on, exposure set as on a real camera, and the film stock it is loaded with. All three are in Camera Properties.
Format
Camera Properties > Camera > Format picks a real film gate or digital sensor. It sets the frame, so the field of view and depth of field follow, as they would on that camera. Your render resolution and aspect stay as you set them: the frame is the largest area of that aspect inside the gate. The panel shows the gate's size under the menu.
- Film
- Regular 8, Super 8, 16 mm, Super 16, 35 mm Academy, 35 mm 2-perf, 35 mm 3-perf, Super 35, 35 mm Anamorphic, VistaVision, 65 mm 5-perf and IMAX 15/70.
- Digital
- ALEXA 35 (and its 16:9 area), ALEXA Mini LF, ALEXA 65, V-RAPTOR 8K VV, VENICE 2 8.6K, Full Frame, APS-C, APS-C (Canon), Micro Four Thirds and 1-inch.
Custom, the default, keeps Blender's own Sensor Fit and Size. Older files open on Custom.
With a real lens, a named format is the sensor, and a lens that can't cover the gate shows its dark corners or image circle, as it would on that camera. Through a 2x anamorphic the gate's width doubles.
Exposure
The Exposure panel sits right after Lens in Camera Properties.
Manual, the default, shows the scene's Film Exposure, as in Blender.
Camera sets exposure from ISO (100 by default), Shutter (1/125 s by default; type 1/60, 2 s or 0.5 s), Aperture (the f-stop from Depth of Field) and Compensation in stops. The panel shows the resulting EV. With lights in real units, the render then looks as a photo with those settings would. The shutter here sets exposure only; motion blur keeps the Shutter in Render Properties > Motion Blur.
Film stock
With a film gauge picked in Format, the Exposure panel gets a Film subpanel. Digital sensors and Custom have none.
Stock loads the camera with a real film, None by default:
- Kodak VISION3 50D, 250D, 200T and 500T (color negative)
- Kodak Double-X (black-and-white negative)
- Kodak Tri-X Reversal (black-and-white reversal)
- Kodak EKTACHROME 100D (color reversal)
- Fujifilm ETERNA Vivid 500 (color negative)
Each stock adds the grain and sharpness its data sheet gives, at the frame's real size on the negative. The same stock looks grainier and softer on Super 8 than on 65 mm at the same render resolution. Grain changes from frame to frame. Tone and color stay your view transform's.
Picking a stock sets the camera's ISO to the stock's rating. With Exposure set to Camera, a higher ISO underexposes the negative and makes it grainier, as on set.
Backing, on the VISION3 stocks only: Antihalation (the default) or Removed, which gives the red glow around bright lights and along bright edges of film sold with its backing removed, as CineStill does.
Grain and Sharpness turn each part on or off.
After a render, Stock, Backing, Grain and Sharpness can be changed without rendering again, in the Image Editor's Camera Effects tab; see Real lenses and flare. A Format change needs a new render.